Dinan S3 BMW 335i – Driven by Car and Driver
The folks over at Car and Driver got their hands on the powerful, sporty DINAN S3 built on the popular BMW 335i. Here is an excerpt from their article:
“Steve Dinan has sold more than 2000 software upgrades for the 135i/335i, making it the most popular upgrade in his company’s 31-year history. And it’s easy to see why: For $2199, a simple download at one of Dinan’s 129 U.S. dealers immediately endows a 335i with as much as 384 horsepower and 421 pound-feet of torque (versus 300 and 300, respectively). Dinan notes that this is actually more like a 60-hp gain, as BMW’s twin-turbo inline-six comfortably makes more than the advertised 300 horsepower in stock form.
The car tested here goes a little further. Outfitted in “Stage 3” trim, the S3 335i has an oil cooler that is twice as large as standard, a bigger intercooler, a better-breathing carbon-fiber intake, and a freer-flowing exhaust that allows for 1 additional psi of boost versus the 384-hp setup (14 psi total versus 8.8 psi stock). The result is 408 horsepower and a bombastic 440 pound-feet of torque. But it doesn’t come cheap: The aforementioned mods total $8895.
Not surprisingly, throttle tip-in is jumpy as the newfound torque introduces itself. The engine is crazy responsive from 3000 rpm but starts to run out of steam between 6000 rpm and the 7000-rpm redline—the boost tapers off in order to keep the turbos comfortably below their 230,000-rpm limit. And for a turbocharged engine, it still sounds remarkably raspy. At 4.4 seconds to 60 mph and 13.0 through the quarter-mile, the S3 335i is about a half-second quicker than a stock 335i in both regards and nearly matches the last manual M3 we tested.”
Author: Horatiu B.
Source: http://www.bmwblog.com/2010/05/26/dinan ... nd-driver/